Ace ACE-3205, Инструкция по установке и эксплуатации

Страница: 262 / 418

Chapter 6 Monitoring and Diagnostics Installation and Operation Manual
6-24 Monitoring Performance ACE-3105, ACE-3205 Ver. 5.2
Parameter Description Possible Values
SES Number of Severely Errored Seconds
where 50 or more CRC error events or
one or more LOSW error events have
been detected. This parameter is
inhibited during UAS state.
UAS Number of ‘Unavailable Seconds’. This
state begins after 10 consecutive
severely-errored seconds, and ends
after 10 consecutive error-free
seconds.
Time elapsed The elapsed time since the beginning
of the current interval. 0 – 899
Valid intervals The number of intervals that are
saved. 0 – 24
Interval The number of the interval to be
displayed. 0 – 24
or the last interval
Port number
The
SHDSL port number for which the
status is displayed.
1 – 4
Default: 1
Wire pair The SHDSL wair-pair number for which
the status is displayed. 1 – 4
Default: 1
Monitoring the Logical Layer
In the logical layer you can monitor ACE-3105, ACE-3205’s PPPoE sessions or Abis
interfaces.
³
To view the current PPPoE status:
1. From the Monitoring menu (see
Figure 6-1
), select Logical Layer.
The Logical Layer menu is displayed.
2. Select PPPoE.
The PPPoE monitoring menu is displayed.