Chapter 6 AP Management
UAG CLI Reference Guide
57
lan_port
{activate | inactivate} pvid
<1..4094>
Enables or disables the specified LAN port on the AP and
configures a PVID (Port VLAN ID) for this port.
lan_port
: the name of the AP’s LAN port (lan1 for example).
vlan_interface
{activate | inactivate} vid
<1..4094> join
lan_port
{tag | untag}
[
lan_port
{tag | untag}] [
lan_port
{tag |
untag}]
Creates a new VLAN or configures an existing VLAN. You can
disable or enable the VLAN, set the VLAN ID, assign up to three
ports to this VLAN as members and set whether the port is to tag
outgoing traffic with the VLAN ID.
vlan_interface
: the name of the VLAN (vlan1 for example).
[no]
vlan_interface
Removes the specified VLAN.
show capwap ap fallback
Displays whether the managed AP(s) will change back to
associate with the primary AP controller when the primary AP
controller is available.
show capwap ap fallback interval
Displays the interval for how often the managed AP(s) check
whether the primary AP controller is available.
show capwap ap wait-list
Displays a list of connected but as-of-yet unmanaged APs. This is
known as the ‘wait list’.
show capwap ap
ap_mac
slot_name
detail
Displays details for the specified radio (
slot_name
) on the
specified AP (
ap_mac
).
show capwap ap {all |
ap_mac
}
Displays the management list (
all
) or whether the specified AP is
on the management list (
ap_mac
).
show capwap ap {all |
ap_mac
} config status
Displays whether or not any AP’s configuration or the specified
AP’s configuration is in conflict with the UAG’s settings for the AP
and displays the settings in conflict if there are any.
show capwap ap all statistics
Displays radio statistics for all APs on the management list.
show capwap manual-add
Displays the current manual add option.
show capwap station all
Displays information for all stations connected to the APs on the
management list.
show lan-provision ap
ap_mac
interface
{
lan_port
|
vlan_interface
| all| ethernet |
uplink | vlan}
Displays the port and/or VLAN settings for the specified AP.
You can also set to display settings for a specified port, a sepcified
VLAN, all physical Ethernet ports, the uplink port or all VLANs on
the AP.
Table 13
Command Summary: AP Management (continued)
COMMAND
DESCRIPTION
Summary of Contents for UAG Series
