manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 297

 Chapter 58 File Manager

UAG CLI Reference Guide

297

4

Use “put” to transfer files from the computer to the UAG.

1

 For example:

In the conf directory, use "put config.conf today.conf” to upload the configuration file (config.conf) 
to the UAG and rename it “today.conf”. 

"put 1.00(XL.0).bin” transfers the firmware (1.00(XL.0).bin) to the UAG. 

The firmware update can take up to five minutes. Do not turn off or reset 
the UAG while the firmware update is in progress! If you lose power 
during the firmware upload, you may need to refer to 

Section 58.8 on 

page 299

 to recover the firmware.

58.6.2  Command Line FTP Configuration File Upload Example

The following example transfers a configuration file named tomorrow.conf from the computer and 
saves it on the UAG as next.conf.

Note: Uploading a custom signature file named "custom.rules”, overwrites all custom 

signatures on the UAG.

Figure 25   

FTP Configuration File Upload Example

58.6.3  Command Line FTP File Download 

1

Connect to the UAG. 

2

Enter “bin” to set the transfer mode to binary.

3

Use “cd” to change to the directory that contains the files you want to download. 

4

Use “dir” or “ls” if you need to display a list of the files in the directory.

5

Use "get” to download files. For example: 

“get vpn_setup.zysh vpn.zysh” transfers the vpn_setup.zysh configuration file on the UAG to your 
computer and renames it “vpn.zysh.”

1.

When you upload a custom signature, the UAG appends it to the existing custom signatures stored in the "custom.rules” file. 

C:\>ftp 192.168.1.1

Connected to 192.168.1.1.

220 FTP Server (UAG) [192.168.1.1]

User (192.168.1.1:(none)): admin

331 Password required for admin.

Password:

230 User admin logged in.

ftp> 

cd conf

250 CWD command successful

ftp> 

bin

200 Type set to I

ftp> 

put tomorrow.conf next.conf

200 PORT command successful

150 Opening BINARY mode data connection for next.conf

226-Post action ok!!

226 Transfer complete.

ftp: 20231 bytes sent in 0.00Seconds 20231000.00Kbytes/sec.

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands