manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 154

Chapter 27 Layer 2 Isolation

UAG CLI Reference Guide

154

27.2  Layer 2 Isolation Commands

The following table lists the 

l2-isolation

 commands. You must use the 

configure terminal

 

command to enter the configuration mode before you can use these commands.    

27.2.1  Layer 2 Isolation White List Sub-Commands

The following table describes the sub-commands for 

l2-isolation white-list

 commands.

Table 89   

l2-isolation Commands

COMMAND

DESCRIPTION

l2-isolation 

Enters the layer 2 isolation sub-command mode to enable Layer-2 isolation 
on the UAG and specific internal interface(s). 

[no] activate

Turns on Layer-2 isolation on the UAG. The 

no

 command disables Layer-2 

isolation on the UAG.

[no] interface 

interface_name

Turns on Layer-2 isolation on a specific internal interface. The 

no

 command 

disables Layer-2 isolation for the specified interface.

white-list 

rule_number

Enters the layer 2 isolation white list sub-command mode to set a new rule 
in the white list. See 

Table 90 on page 154

 for the sub-commands.

rule_number

: 1 - N, where N depends on the UAG model.

white-list activate

Turns on the white list on the UAG.

IP addresses that are not listed in the white list are blocked from 
communicating with other devices in the layer-2-isolation-enabled internal 
interface(s) except for broadcast packets.

white-list append

Enters the layer 2 isolation white list sub-command mode to add a rule to 
the end of the white list. See 

Table 90 on page 154

 for the sub-commands.

white-list flush

Removes all rules in the white list.

white-list no activate

Turns the white list off.

no l2-isolation activate

Disables Layer-2 isolation on the UAG.

no l2-isolation white-list 

rule_number

Disables the specified rule in the white list.

rule_number

: 1 - N, where N depends on the UAG model.

no l2-isolation white-list activate

Turns on the white list on the UAG.

show l2-isolation

Displays whether Layer-2 isolation is enabled on an interface.

show l2-isolation activation

Displays whether Layer-2 isolation is enabled on the UAG.

show l2-isolation white-list 

[

rule_number

]

Displays all or a specified white list rule settings.

rule_number

: 1 - N, where N depends on the UAG model.

show l2-isolation white-list 

activation

Displays whether the white list is enabled.

Table 90   

l2-isolation white-list Sub-commands

COMMAND

DESCRIPTION

[no] activate

Enables the rule. The 

no

 command disables the rule.

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands