![background image](http://html.mh-extra.com/html/zyxel-communications/uag-series/uag-series_reference-manual_944300225.webp)
Chapter 44 User/Group
UAG CLI Reference Guide
225
44.2 User/Group Commands Summary
The following table identifies the values required for many
username/groupname
commands.
Other input values are discussed with the corresponding commands.
The following sections list the
username/groupname
commands.
44.2.1 User Commands
The first table lists the commands for users.
Table 138
username/groupname Command Input Values
LABEL
DESCRIPTION
username
The name of the user (account). You may use 1-31 alphanumeric characters, underscores(
_
),
or dashes (-), but the first character cannot be a number. This value is case-sensitive.
groupname
The name of the user group. You may use 1-31 alphanumeric characters, underscores(
_
), or
dashes (-), but the first character cannot be a number. This value is case-sensitive. It cannot
be the same as the user name.
Table 139
username/groupname Commands Summary: Users
COMMAND
DESCRIPTION
show username [
username
]
Displays information about the specified user or about all users
set up in the UAG.
username
username
nopassword user-type {admin |
pre-subscriber | guest-manager | user | guest |
limited-admin}
Creates the specified user (if necessary), disables the password,
and sets the user type for the specified user.
username
username
password
password
user-type
{admin | pre-subscriber | guest-manager | user |
guest | limited-admin}
Creates the specified user (if necessary); enables and sets the
password; and sets the user type for the specified user.
password
: You can use 1-63 printable ASCII characters, except
double quotation marks (“) and question marks (?).
username
username
user-type ext-user
Creates the specified user (if necessary) and sets the user type
to
Ext-User
.
username
username
user-type mac-address
Creates the specified user (if necessary) and sets the user type
to
mac-address
.
username
username
user-type ext-group-user
associated-aaa-server
server_profile
group-id
id
Specify the value of the AD or LDAP server’s Group Membership
Attribute that identifies the group to which the specified ext-
group-user type user account belongs.
no username
username
Deletes the specified user.
username
username
[no] description
description
Sets the description for the specified user. The
no
command
clears the description.
description
: You can use alphanumeric and
()+/
:=?!*#@$_%-
characters, and it can be up to 60 characters
long.
username
username
[no] logon-due-time
time
Sets the time (in 24-hour format) at which the user will be
automatically logged out of the UAG and has to log in again. The
no
command resets the due time to its default value (
12:00
).
username
username
[no] logon-lease-time
<0..1440>
Sets the lease time for the specified user. Set it to zero to set
unlimited lease time. The
no
command sets the lease time to
five minutes (regardless of the current default setting for new
users).
Summary of Contents for UAG Series
