Chapter 59 Logs
UAG CLI Reference Guide
307
59.1.4 E-mail Profile Commands
This table lists the commands for the e-mail profile settings.
Table 196
logging Commands: E-mail Profile Settings
COMMAND
DESCRIPTION
show logging status mail
Displays the current settings for the e-mail profiles.
[no] logging mail <1..2>
Enables the specified e-mail profile. The
no
command disables
the specified e-mail profile.
[no] logging mail <1..2> address {
ip
|
hostname
}
Sets the URL or IP address of the mail server for the specified e-
mail profile. The
no
command clears the mail server field.
hostname
: You may up to 63 alphanumeric characters, dashes (-
), or periods (.), but the first character cannot be a period.
logging mail <1..2> sending_now
Sends mail for the specified e-mail profile immediately, according
to the current settings.
[no] logging mail <1..2> authentication
Enables SMTP authentication. The
no
command disables SMTP
authentication.
[no] logging mail <1..2> authentication
username
username
password
password
Sets the username and password required by the SMTP mail
server. The
no
command clears the username and password
fields.
username
: You can use alphanumeric characters, underscores
(_), and dashes (-), and it can be up to 31 characters long.
password
: You can use most printable ASCII characters. You
cannot use square brackets [ ], double quotation marks (“),
question marks (?), tabs or spaces. It can be up to 31 characters
long.
[no] logging mail <1..2> category
module_name
level {alert | all}
Specifies what kind of information is logged for the specified
category. The
no
command disables logging for the specified
category.
[no] logging mail <1..2> port <1..65535>
Sets the port number of the mail server for the specified e-mail
profile.
[no] logging mail <1..2> {send-log-to | send-
alerts-to}
e_mail
Sets the e-mail address for logs or alerts. The
no
command
clears the specified field.
e_mail
: You can use up to 63 alphanumeric characters,
underscores (_), or dashes (-), and you must use the @
character.
[no] logging mail <1..2> subject
subject
Sets the subject line when the UAG mails to the specified e-mail
profile. The
no
command clears this field.
subject
: You can use up to 60 alphanumeric characters,
underscores (_), dashes (-), or
!@#$%*()+=;:’,./
characters.
[no] logging mail <1..2> schedule {full |
hourly}
Sets the e-mail schedule for the specified e-mail profile. The
no
command clears the schedule field.
logging mail <1..2> schedule daily hour <0..23>
minute <0..59>
Sets a daily e-mail schedule for the specified e-mail profile.
logging mail <1..2> schedule weekly day
day
hour <0..23> minute <0..59>
Sets a weekly e-mail schedule for the specified e-mail profile.
day
: sun | mon | tue | wed | thu | fri | sat
Summary of Contents for UAG Series
