manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 77

UAG CLI Reference Guide

77

C

H A P T E R

      1 0

Dynamic Channel Selection

This chapter shows you how to configure and use dynamic channel selection on the UAG.

10.1  DCS Overview

Dynamic Channel Selection (DCS) is a feature that allows an AP to automatically select the radio 
channel upon which it broadcasts by passively listening to the area around it and determining what 
channels are currently being broadcast on by other devices.

When numerous APs broadcast within a given area, they introduce the possibility of heightened 
radio interference, especially if some or all of them are broadcasting on the same radio channel. 
This can make accessing the network potentially rather difficult for the stations connected to them. 
If the interference becomes too great, then the network administrator must open his AP 
configuration options and manually change the channel to one that no other AP is using (or at least 
a channel that has a lower level of interference) in order to give the connected stations a minimum 
degree of channel interference.

10.2  DCS Commands

The following table identifies the values required for many of these commands. Other input values 
are discussed with the corresponding commands.

The following table describes the commands available for dynamic channel selection. You must use 
the 

configure terminal

 command to enter the configuration mode before you can use these 

commands. 

Table 30   

Input Values for DCS Commands

LABEL

DESCRIPTION

interval

Enters the dynamic channel selection interval time. The range is 10 ~ 1440 
minutes.

Table 31   

Command Summary: DCS

COMMAND

DESCRIPTION

[no] dcs activate

Starts dynamic channel selection. Use the 

no

 parameter to turn it 

off.

dcs 2g-selected-channel 

2.4g_channels

Sets the channels that are available in the 2.4 GHz band when 
you manually configure the channels an AP can use.

dcs 5g-selected-channel 

5g_channels

Sets the channels that are available in the 5 GHz band when you 
manually configure the channels an AP can use.

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands