Chapter 55 Dynamic Guest Accounts
UAG CLI Reference Guide
270
55.2.1 dynamic-guest Sub-commands
The following table describes the sub-commands for several
dynamic-guest
commands. Note that
not all rule commands use all the sub-commands listed here.
[no] dynamic-guest
user_name
Creates a dynamic guest account (billing-user) with the specified user
name and enters the dynamic-guest sub-command mode to set the
password and timeout settings. See
commands.
The
no
command removes the specified dynamic-guest account.
show dynamic-guest log
Displays all the dynamic guest accounts which are either active or expired.
show dynamic-guest log create-time
begin
yyyy-mm-dd
hh:mm
end
yyyy-mm-dd
hh:mm
Displays all the active and/or expired dynamic guest accounts that were
generated within a specified period of time.
show dynamic-guest users
Displays all the active dynamic guest accounts on the UAG.
Table 169
dynamic-guest Commands (continued)
COMMAND
DESCRIPTION
Table 170
dynamic-guest Sub-commands
COMMAND
DESCRIPTION
bandwidth {upload | download}
<0..1048576> priority <1..7>
Specifies the maximum bandwidth allowed for the user account in kilobits
per second and types a number between 1 and 7 to set the priority for the
user’s traffic. The smaller the number, the higher the priority.
upload
refers to the traffic the UAG sends out from a user.
download
refers to the traffic the UAG sends to a user.
[no] bandwidth activate
Turns on bandwidth management for the user account.
The
no
command disables bandwidth management for the user account.
charge
price
Sets the account’s price, up to 99999999.99, per time unit.
create-time
yyyy-mm-dd hh:mm
Sets the date and time the account is created.
expire-time
yyyy-mm-dd hh:mm
Sets the date and time the account becomes invalid.
password
password
Sets the password for the account.
payment-info {cash | payment-
service}
Sets the method of payment for the account.
phone
phone_number
Sets the mobile phone number for the account.
quota {total | upload | download}
megabytes <0..1023>
Sets how much downstream and/or upstream data in Megabytes can be
transmitted through the external interface before the account expires. 0
means there is no data limit for the user account.
quota {total | upload | download}
gigabytes <0..100>
Sets how much downstream and/or upstream data in Gigabytes can be
transmitted through the external interface before the account expires. 0
means there is no data limit for the user account.
quota type {total | upload-
download}
Sets a limit for the user account. This only applies to user’s traffic that is
received or transmitted through the external interface.
Note: When the limit is exceeded, the user is not allowed to access the
Internet through the UAG.
total
: set a limit on the total traffic in both directions.
upload-download
: set a limit on the upstream traffic and downstream
traffic respectively.
Summary of Contents for UAG Series
