manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 101

 Chapter 13 Interfaces

UAG CLI Reference Guide

101

gateway 4.6.7.8, upstream bandwidth 345, downstream bandwidth 123, and description “I am vir 
interface”.

13.5  PPPoE/PPTP Specific Commands

This section covers commands that are specific to PPPoE/PPTP interfaces. PPPoE/PPTP interfaces 
also use many of the general interface commands discussed at the beginning of 

Section 13.2 on 

page 86

.

The following table identifies the values required for many of these commands. Other input values 
are discussed with the corresponding commands.

This table lists the PPPoE/PPTP interface commands.

Router# configure terminal

Router(config)# interface lan1:1

Router(config-if-vir)# ip address 1.2.3.4 255.255.255.0

Router(config-if-vir)# ip gateway 4.6.7.8

Router(config-if-vir)# upstream 345

Router(config-if-vir)# downstream 123

Router(config-if-vir)# description I am vir interface

Router(config-if-vir)# exit

Table 47   

Input Values for PPPoE/PPTP Interface Commands

LABEL

DESCRIPTION

interface_name

PPPoE/PPTP interface: ppp

x

, 

x

 = 0 - N, where N depends on the number of PPPoE/PPTP 

interfaces your UAG model supports.

profile_name

The name of the ISP account. You may use 1-31 alphanumeric characters, 
underscores(

_

), or dashes (-), but the first character cannot be a number. This value is 

case-sensitive.

Table 48   

interface Commands: PPPoE/PPTP Interfaces

COMMAND

DESCRIPTION

interface dial 

interface_name

Connects the specified PPPoE/PPTP interface.

interface disconnect 

interface_name

Disconnects the specified PPPoE/PPTP interface.

interface 

interface_name

Creates the specified interface if necessary and enters sub-command mode.

[no] account 

profile_name

Specifies the ISP account for the specified PPPoE/PPTP interface. The 

no

 

command clears the ISP account field.

[no] bind 

interface_name

Specifies the base interface for the PPPoE/PPTP interface. The 

no

 command 

removes the base interface.

[no] connectivity {nail-up | 

dial-on-demand}

Specifies whether the specified PPPoE/PPTP interface is always connected (nail-
up) or connected only when used (dial-on-demand). The 

no

 command sets it 

to dial-on-demand.

[no] local-address 

ip

Specifies a static IP address for the specified PPPoE/PPTP interface. The 

no

 

command makes the PPPoE/PPTP interface a DHCP client; the other computer 
assigns the IP address.

[no] remote-address 

ip

Specifies the IP address of the PPPoE/PPTP server. If the PPPoE/PPTP server is 
not available at this IP address, no connection is made. The 

no

 command lets 

the UAG get the IP address of the PPPoE/PPTP server automatically when it 
establishes the connection.

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands