Chapter 53 SSL Application
UAG CLI Reference Guide
261
53.1.2 SSL Application Command Examples
The following commands create and display a server-type SSL application object named example
for a link to the website at http://www.example.com.
server-type weblink url
url
Sets this to create a link to a web site you specified that you expect the SSL
VPN users to commonly use.
url
: Enter the fully qualified domain name (FQDN) or IP address of the
application server. You must enter the “http://” or “https://” prefix. For
example,
https://1.2.3.4
. SSL VPN users are restricted to access only
web pages or files in this directory. For example, if you enter “\remote\” in
this field, emote users can only access web pages or files in the “remote”
directory.
If a link contains a file that is not within this domain, then SSL VPN users
cannot access it.
no server-type
Remove the type of service configuration for this SSL application.
[no] webpage-encrypt
Turn on web encrypt to prevent users from saving the web content.
Table 166
SSL Application Object Commands
COMMAND
DESCRIPTION
Router(config)# sslvpn application example
Router(sslvpn application)# server-type weblink url http://www.example.com
Router(sslvpn application)# exit
Router(config)# show sslvpn application
SSL Application: example
Server Type: weblink
URL: http://www.example.com
Entry Point:
Encrypted URL: ~aHR0cDovL2luZm8v/
Web Page Encryption: yes
Reference: 0
Server Address:
Starting Port:
Ending Port:
Program Path:
Router(config)#
Summary of Contents for UAG Series
