![background image](http://html.mh-extra.com/html/zyxel-communications/uag-series/uag-series_reference-manual_944300137.webp)
Chapter 21 VPN 1-1 Mapping
UAG CLI Reference Guide
137
The following table describes the commands available for VPN 1-1 mapping.
You must use the
configure terminal
command to enter the configuration mode before you can use the
configuration commands.
Table 78
Command Summary: vpn-1-1-map
COMMAND
DESCRIPTION
[no] vpn-1-1-map activate
Enables VPN 1-1 mapping on the UAG. The
no
command disables VPN
1-1 mapping on the UAG.
[no] vpn-1-1-map pool
profile_name
Enters the vpn-1-1-map pool sub-command mode to create the
specified VPN 1-1 mapping pool profile. See
the sub-commands. The
no
command removes the pool profile.
A pool profile defines the public IP address(es) that the UAG assigns to
the matched users and the interface through which the user’s traffic is
forwarded.
[no] vpn-1-1-map rule <1..16>
Enters the vpn-1-1-map rule sub-command mode to create the
specified VPN 1-1 mapping rule. See
commands. The
no
command removes the rule.
vpn-1-1-map pool rename
profile_name
profile_name
Renames the specified VPN 1-1 mapping pool profile (first
profile_name
) to the specified name (second
profile_name
).
vpn-1-1-map rule append
Enters the vpn-1-1-map rule sub-command mode to create a new VPN
1-1 mapping rule at the end of the current list. See
for the sub-commands.
vpn-1-1-map rule flush
Clears all VPN 1-1 mapping rules.
vpn-1-1-map rule insert <1..16>
Enters the vpn-1-1-map rule sub-command mode to add a new VPN 1-
1 mapping rule before the specified rule number. See
for the sub-commands.
vpn-1-1-map rule move <1..16> to <1..16>
Moves the specified rule to the specified location and renumbers the
other rules accordingly.
show vpn-1-1-map activation
Shows whether the VPN 1-1 mapping feature is enabled or disabled on
the UAG.
show vpn-1-1-map pool [
profile_name
]
Displays settings of the specified or all pool profiles.
show vpn-1-1-map rule [<1..16>]
Displays settings of the specified or all VPN 1-1 mapping rules.
show vpn-1-1-map rule begin <1..16> end
<1..16>
Displays settings for a range of VPN 1-1 mapping rules.
show vpn-1-1-map statistics summary
Displays statistics for each of the VPN 1-1 mapping rules
show vpn-1-1-map user-mapping summary
Displays the status of the active users to which the UAG applied a VPN
1-1 mapping rule
Summary of Contents for UAG Series
