manualshive.com logo in svg

ZyXEL Communications UAG Series, Reference Manual

Share
Download
ZyXEL Communications UAG Series Reference Manual Download Page 95

 Chapter 13 Interfaces

UAG CLI Reference Guide

95

13.2.5  OSPF Commands

This table lists the commands for OSPF settings.

[no] ip rip {send | receive} version 

<1..2>

Sets the send or receive version to the specified version number. The 

no

 command sets the send or received version to the current global 

setting for RIP. See 

Chapter 17 on page 121

 for more information 

about routing protocols.

[no] ip rip v2-broadcast

Enables RIP-2 packets using subnet broadcasting. The 

no

 command 

uses multi-casting.

show rip {global  | interface {all | 

interface_name

}}

Displays RIP settings.

Table 41   

interface Commands: RIP Settings (continued)

COMMAND

DESCRIPTION

Table 42   

interface Commands: OSPF Settings

COMMAND

DESCRIPTION

router ospf

Enters sub-command mode.

[no] network 

interface_name

 area 

ip

Makes the specified interface part of the specified area. The 

no

 

command removes the specified interface from the specified area, 
disabling OSPF in this interface.

[no] passive-interface 

interface_name

Sets the OSPF direction of the specified interface to in-only. The 

no

 

command makes OSPF bi-directional in the specified interface.

interface 

interface_name

Enters sub-command mode.

[no] ip ospf priority <0..255>

Sets the priority of the specified interface to the specified value. The 

no

 command sets the priority to 1.

[no] ip ospf cost <1..65535>

Sets the cost to route packets through the specified interface. The 

no

 

command sets the cost to 10.

no ip ospf authentication

Disables authentication for OSPF in the specified interface.

ip ospf authentication

Enables text authentication for OSPF in the specified interface.

ip ospf authentication message-digest

Enables MD5 authentication for OSPF in the specified interface.

ip ospf authentication same-as-area

To exchange OSPF routing information with peer border routers, you 
must use the same authentication method that they use. This 
command makes OSPF authentication in the specified interface follow 
the settings in the corresponding area.

[no] ip ospf authentication-key 

password

Sets the simple text password for OSPF text authentication in the 
specified interface. The 

no

 command clears the text password.

password

: 1-8 alphanumeric characters or underscores

ip ospf message-digest-key <1..255> 

md5 

password

Sets the ID and password for OSPF MD5 authentication in the specified 
interface.

password

: 1-16 alphanumeric characters or underscores

no ip ospf message-digest-key

Clears the ID and password for OSPF MD5 authentication in the 
specified interface.

[no] ip ospf hello-interval <1..65535>

Sets the number of seconds between “hello” messages to peer routers. 
These messages let peer routers know the UAG is available. The 

no

 

command sets the number of seconds to 10. See 

ip ospf dead-

interval

 for more information.

Summary of Contents for UAG Series










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands