![background image](http://html.mh-extra.com/html/zyxel-communications/uag-series/uag-series_reference-manual_944300245.webp)
Chapter 49 AAA Server
UAG CLI Reference Guide
245
49.2.3 radius-server Commands
The following table lists the
radius-server
commands you use to set the default RADIUS server.
49.2.4 radius-server Command Example
The following example sets the secret key and timeout period of the default RADIUS server
(172.16.10.100) to “87643210” and 80 seconds.
49.2.5 aaa group server ad Commands
The following table lists the
aaa group server ad
commands you use to configure a group of
AD servers.
Table 157
radius-server Commands
COMMAND
DESCRIPTION
show radius-server
Displays the default RADIUS server settings.
[no] radius-server host
radius_server
auth-port
auth_port
Sets the RADIUS server address and service port number. Enter the IP address
(in dotted decimal notation) or the domain name of a RADIUS server. The
no
command clears the settings.
[no] radius-server key
secret
Sets a password (up to 15 alphanumeric characters) as the key to be shared
between the RADIUS server and the UAG. The
no
command clears this setting.
[no] radius-server timeout
time
Sets the search timeout period (in seconds). Enter a number between 1 and
300. The
no
command clears this setting.
Router# configure terminal
Router(config)# radius-server host 172.16.10.100 auth-port 1812
Router(config)# radius-server key 876543210
Router(config)# radius-server timeout 80
Router(config)# show radius-server
host : 172.16.10.100
authentication port: 1812
key : 876543210
timeout : 80
Router(config)#
Table 158
aaa group server ad Commands
COMMAND
DESCRIPTION
clear aaa group server ad [
group-name
]
Deletes all AD server groups or the specified AD server group.
Note: You can NOT delete a server group that is currently in use.
show aaa group server ad
group-name
Displays the specified AD server group settings.
[no] aaa group server ad
group-name
Sets a descriptive name for an AD server group. Use this command to enter
the sub-command mode.
The
no
command deletes the specified server group.
aaa group server ad rename
group-name
group-name
Changes the descriptive name for an AD server group.
aaa group server ad
group-name
Enter the sub-command mode to configure an AD server group.
[no] case-sensitive
Specify whether or not the server checks the username case. Set this to be
the same as the server’s behavior.
Summary of Contents for UAG Series
