Chapter 19 DDNS
UAG CLI Reference Guide
130
19.3 DDNS Commands Example
The following example sets up a DDNS profile where the interface is wan1 and uses HTTP.
[no] backup-iface
interface_name
Sets the backup WAN interface in the specified DDNS profile.
The
no
command clears it.
[no] ha-iface
interface_name
Sets the HA interface in the specified DDNS profile. The
no
command clears it.
[no] backmx
Enables the backup mail exchanger. The
no
command
disables it.
[no] wildcard
Enables the wildcard feature. The
no
command disables it.
[no] https activate
Encrypts traffic using SSL (port 443), including traffic with
username and password, to the DDNS server. Not all DDNS
providers support this option.
The
no
command disables it.
[no] url
url
Sets the URL that can be used to access the server that will
host the DDSN service. For example,
# url /api/dynamic/
update.php?hostname=home.example.com& ip=10.1.1.1
The
no
command disables it.
[no] ddns-server
fqdn
Sets the IP address of the server that will host the DDSN
service. For example,
# ddns-server www.dnspark.net
The
no
command disables it.
[no] additional-ddns-options {--dyndns_system
| --ip_server_name}
Avaialable for
User custom
. Enter one ofg the following.
•
--ip_server_name
which should be the URL to get the
server’s public IP address - for example, http://
myip.easylife.tw/
•
--dyndns_system
to specify the DYNDNS Server type -
for example, [email protected]
Table 74
ip ddns Commands (continued)
COMMAND
DESCRIPTION
Router# configure terminal
Router(config)# ip ddns profile bbb
# activate
# service-type user-custom
# username yjyeh001 password xxxxxx
# host yjye007.dyndns.org
# wan-iface wan1
# url /nic/update?
# ddns-server members.dyndns.org
# additional-ddns-options --dyndns_system [email protected]
Summary of Contents for UAG Series
