![background image](http://html.mh-extra.com/html/zyxel-communications/uag-series/uag-series_reference-manual_944300123.webp)
Chapter 17 Routing Protocol
UAG CLI Reference Guide
123
17.2.3 OSPF Area Commands
This table lists the commands for OSPF areas.
17.2.4 Virtual Link Commands
This table lists the commands for virtual links in OSPF areas.
Table 67
router Commands: OSPF Areas
COMMAND
DESCRIPTION
router ospf
Enters sub-command mode.
[no] network
interface
area IP
Adds the specified interface to the specified area. The
no
command removes the specified interface from the specified area.
[no] area IP [{stub | nssa}]
Creates the specified area and sets it to the indicated type. The
no
command removes the area.
[no] area IP authentication
Enables text authentication in the specified area. The
no
command
disables authentication in the specified area.
[no] area IP authentication message-
digest
Enables MD5 authentication in the specified area. The
no
command disables authentication in the specified area.
[no] area IP authentication
authentication-key
authkey
Sets the password for text authentication in the specified area. The
no
command clears the password.
[no] area IP authentication message-
digest-key <1..255> md5
authkey
Sets the MD5 ID and password for MD5 authentication in the
specified area. The
no
command clears the MD5 ID and password.
Table 68
router Commands: Virtual Links in OSPF Areas
COMMAND
DESCRIPTION
show ospf area IP virtual-link
Displays information about virtual links for the specified area.
router ospf
[no] area IP virtual-link IP
Creates the specified virtual link in the specified area. The
no
command removes the specified virtual link.
[no] area IP virtual-link IP authentication
Enables text authentication in the specified virtual link. The
no
command disables authentication in the specified virtual link.
[no] area IP virtual-link IP authentication
message-digest
Enables MD5 authentication in the specified virtual link. The
no
command disables authentication in the specified virtual link.
[no] area IP virtual-link IP authentication
authentication-key
authkey
Sets the password for text authentication in the specified virtual
link. The
no
command clears the password in the specified
virtual link.
[no] area IP virtual-link IP authentication
message-digest-key <1..255> md5
authkey
Sets the MD5 ID and password for MD5 authentication in the
specified virtual link. The
no
command clears the MD5 ID and
password in the specified virtual link.
[no] area IP virtual-link IP authentication
same-as-area
Sets the virtual link’s authentication method to the area’s default
authentication.
[no] area IP virtual-link IP
authentication-key
authkey
Sets the password for text authentication in the specified virtual
link. The
no
command clears the password.
area IP virtual-link IP message-digest-key
<1..255> md5
authkey
Sets the MD5 ID and password for MD5 authentication in the
specified virtual link.
no area IP virtual-link IP message-digest-
key <1..255>
Clears the MD5 ID in the specified virtual link.
Summary of Contents for UAG Series
