![background image](http://html.mh-extra.com/html/zyxel-communications/uag-series/uag-series_reference-manual_944300036.webp)
Chapter 1 Command Line Interface
UAG CLI Reference Guide
36
1.8 Ethernet Interfaces
How you specify an Ethernet interface depends on the UAG model.
• The UAG uses a name such as wan1, wan2, lan1, lan2, or dmz.
1.9 Saving Configuration Changes
Use the
write
command to save the current configuration to the UAG.
Note: Always save the changes before you log out after each management session. All
unsaved changes will be lost after the system restarts.
1.10 Logging Out
Enter the
exit
or
end
command in configure mode to go to privilege mode.
Enter the
exit
command in user mode or privilege mode to log out of the CLI.
week-day sequence, i.e.
1=first,2=second
1
1-4
xauth method
1-31
alphanumeric or _-
xauth password
1-31
alphanumeric or ;|`~!@#$%^&*()_+\{}':,./<>=-
mac address
0-12 (even
number)
hexadecimal
for example: aa aabbcc aabbccddeeff
Table 3
Input-Value Formats for Strings in CLI Commands (continued)
TAG
# VALUES
LEGAL VALUES
Summary of Contents for UAG Series
