Chapter 43 Content Filtering
UAG CLI Reference Guide
217
43.6 Content Filter Report Commands
See the web configurator User’s Guide for more information about how to view content filtering
reports after you have activated the category-based content filtering subscription service.
Use the
configure terminal
command to enter the configuration mode to be able to use these
commands.
43.7 Content Filter Profile Commands
The following table lists the commands that you can use to configure a content filtering policy. A
content filtering policy defines which content filter profile should be applied, when it should be
applied, and to whose web access it should be applied. Use the
configure terminal
command
[no] {
ipv4
|
ipv4_cidr
|
ipv4_range
|
wildcard_domainname
|
tld
}
Adds or removes a common trusted or forbidden web site entry.
ipv4
: IPv4 address <W.X.Y.Z>
ipv4_cidr
: IPv4 subnet in CIDR format, i.e. 192.168.1.0/32
<W.X.Y.Z>/<1..32>
ipv4_range
: Range of IPv4 addresses. <W.X.Y.Z>-<W.X.Y.Z>
wildcard_domainname
: wildcard domain name, i.e. zyxel*.co*
(([*a-z0-9\-]){1,63}\.)+([*a-z0-9\-]){1,63}
tld
: top level domain.
exit
Leaves the sub-command mode.
show content-filter passed warning
Displays the UAG’s record of sessions for which it has given the
user a warning before allowing access.
show content-filter policy
Displays the content filtering policies.
show content-filter settings
Displays the general content filtering settings.
show content-filter common-list {trust|forbid}
Displays the common list of trusted or forbidden web sites.
Table 132
content-filter General Commands (continued)
COMMAND
DESCRIPTION
Table 133
content-filter report Commands Summary
COMMAND
DESCRIPTION
[no] content-filter report server {
ipv4
|
domain_name
}
Sets the IP address or the domain name of the server to
which the UAG sends content filtering reports.
The
no
command removes the specified server.
[no] content-filter report deactivate
Sets the UAG to not collect category-based content filtering
statistics.
The
no
command allows the UAG to collect category-based
content filtering statistics.
Summary of Contents for UAG Series
