ZyXEL Communications EX3510-B1, User Manual

Page: 97 / 313

Chapter 7 Wireless
EX3510-B1 User’s Guide
97
7.4 MAC Authentication
This screen allows you to configure the Zyxel Device to give exclusive access to specific devices (Allow)
or exclude specific devices from accessing the Zyxel Device (Deny) based on the device(s) MAC
address. Every Ethernet device has a unique MAC (Media Access Control) address. It is assigned at the
factory and consists of six pairs of hexadecimal characters; for example, 00:A0:C5:00:00:02. You need to
know the MAC addresses of the device(s) you want to allow/deny to configure this screen.
Note: You can have up to 25 MAC authentication rules.
Use this screen to view your Zyxel Device’s MAC filter settings and add new MAC filter rules. Click
Network Setting > Wireless > MAC Authentication . The screen appears as shown.
Figure 56 Network Setting> Wireless > MAC Authentication
The following table describes the labels in this screen.
Cancel Click Cancel to exit this screen without saving any changes.
OK Click OK to save your changes.
Table 24 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL DESCRIPTION
Table 25 Network Setting > Wireless > MAC Authentication
LABEL DESCRIPTION
General
SSID Select the SSID for which you want to configure MAC filter settings.