manualshive.com logo in svg

ZyXEL Communications EX3510-B1, User Manual

Share
Download
ZyXEL Communications EX3510-B1 User Manual Download Page 63

 Chapter 5 Connection Status

EX3510-B1 User’s Guide

63

Figure 29   

Connectivity: Connected Devices

Icon and Device Name

You can change the icon and name of a connected device by clicking the device’s Edit icon. Select 
an icon and/or enter a name in the 

Device Name

 field for a connected device. Click 

Save

 to save your 

changes.

Figure 30   

Connectivity: Edit

5.1.3  System Information

Use this screen to view the basic system information of the Zyxel Device.

Figure 31   

System Information

Click the Arrow icon ( ) to open the following screen. Use this screen to view more information on the 
status of your firewall and interfaces (WAN, LAN, and WiFi).

Summary of Contents for EX3510-B1


























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands