ZyXEL Communications EX3510-B1, User Manual

Page: 294 / 313

Appendix B IPv6
EX3510-B1 User’s Guide
294
Example – Enabling IPv6 on Windows 7
Windows 7 supports IPv6 by default. DHCPv6 is also enabled when you enable IPv6 on a Windows 7
computer.
To enable IPv6 in Windows 7:
1
Select Control Panel > Network and Sharing Center > Local Area Connection .
2
Select the Internet Protocol Version 6 (TCP/IPv6) checkbox to enable it.
3
Click OK to save the change.
4
Click Close to exit the Local Area Connection Status screen.
5
Select Start > All Programs > Accessories > Command Prompt .
6
Use the
ipconfig
command to check your dynamic IPv6 address. This example shows a global address
(2001:b021:2d::1000) obtained from a DHCP server.
C:\>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:b021:2d::1000
Link-local IPv6 Address . . . . . : fe80::25d8:dcab:c80a:5189%11
IPv4 Address. . . . . . . . . . . : 172.16.100.61
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : fe80::213:49ff:feaa:7125%11
172.16.100.254