ZyXEL Communications EX3510-B1 User Manual Download Page 22

Page: 22 / 313

Chapter 1 Introducing the Zyxel Device

EX3510-B1 User’s Guide

Figure 6

Rear Panel

The following table describes the items on the rear panel.

Table 3 Panel Ports and Buttons

LABEL

DESCRIPTION

WPS

Press the WPS button for more than one second to quickly set up a secure WiFi connection between
the device and a WPS-compatible client.

Power

Connect the power adapter and press the power button to start the device.

Reset

Press the button to return the Zyxel Device to the factory defaults.

USB

The USB port is reserved for future development.

1G WAN

Connect an Ethernet cable to a modem for Internet access.

ETHERNET1 –
ETHERNET4

Connect computers or other Ethernet devices to Ethernet ports for Internet access.

Summary of Contents for EX3510-B1


























































































































































































































































































































Search results

Summary of Contents for EX3510-B1

Reviews:

Brands by name

Popular brands

ZyXEL Communications EX3510-B1, User Manual

Search results

Summary of Contents for EX3510-B1

Reviews:

Brands by name

Popular brands