ZyXEL Communications EX3510-B1, User Manual

Page: 100 / 313

Chapter 7 Wireless
EX3510-B1 User’s Guide
100
7.6 WMM Settings
Use this screen to enable WiFi MultiMedia ( WMM ) and WMM Automatic Power Save ( APSD ) in wireless
networks for multimedia applications. WMM enhances data transmission quality, while APSD improves
power management of wireless clients. This allows delay-sensitive applications, such as voice and
videos, to run more smoothly.
Click Network Setting > Wireless > WMM to display the following screen.
Figure 59 Network Setting > Wireless > WMM
Note: WMM cannot be disabled if 802.11 mode includes 802.11n or 802.11ac.
Method 2 Use this section to set up a WPS wireless network by entering the PIN of the client into the Zyxel
Device. Click this switch and make it turn blue. Click
Apply to activate WPS method 2 on the
Zyxel Device.
Register Enter the PIN of the device that you are setting up a WPS connection with and click Register to
authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device’s settings.
Note: You must also activate WPS on that device within two minutes to have it
present its PIN to the Zyxel Device.
Cancel Click Cancel to restore the default or previously saved settings.
Apply Click Apply to save your changes.
Table 26 Network Setting > Wireless > WPS (continued)
LABEL DESCRIPTION