ZyXEL Communications EX3510-B1, User Manual

Page: 144 / 313

Chapter 9 Routing
EX3510-B1 User’s Guide
144
9.4.1 Add/Edit Policy Route
Click Add New Policy Route in the Policy Route screen or click the Edit icon next to a policy. Use this
screen to configure the required information for a policy route.
Figure 86 Policy Route: Add/Edit
The following table describes the labels in this screen.
Table 44 Policy Route: Add/Edit
LABEL DESCRIPTION
Active Click this switch to enable or disable the policy route. When the switch goes to the right , the
function is enabled. Otherwise, it is not.
Route Name Enter a descriptive name of up to 8 printable English keyboard characters, not including spaces.
Source IP
Address Enter the source IP address.
Source Subnet
Mask Enter the source subnet mask address.
Protocol Select the transport layer protocol ( TCP or UDP ).
Source Port Enter the source port number.
Source MAC Enter the source MAC address.
Source Interface
(ex: br0 or
LAN1~LAN4) Type the name of the interface from which the matched traffic is sent.
WAN Interface This field shows ETHWAN as the WAN interface through which the traffic is sent.