ZyXEL Communications EX3510-B1, User Manual

Page: 213 / 313

Chapter 18 Parental Control
EX3510-B1 User’s Guide
213
Figure 134 Security > Parental Control > Add/Edit PCP (Network Service & Site/URL Keyword)
The following table describes the fields in this screen.
Table 86
Security > Parental Control >Add/Edit PCP
LABEL DESCRIPTION
General
Active Select Enable or Disable to activate or deactivate the parental control rule.
Parental Control
Profile Name Enter a descriptive name for the rule.
Home Network
User Select the LAN user that you want to apply this rule to from the drop-down list box. If you select
Custom , enter the LAN user’s MAC address. If you select All , the rule applies to all LAN users.
Rule List In Home Network User , select Custom , enter the LAN user’s MAC address, then click the Add
icon to enter a computer MAC address for this PCP. Up to five are allowed. Click the Delete icon
to remove one.
Internet Access Schedule
Day Select check boxes for the days that you want the Zyxel Device to perform parental control.
Time Drag the time bar to define the time that the LAN user is allowed access ( Authorized access ) or
denied access ( No access ).
Add New
Service Click this to add a new time bar. Up to 3 are allowed.
Network Service
Network Service
Setting If you select Block , the Zyxel Device prohibits the users from viewing the web sites with the URLs
listed below.
If you select Allow , the Zyxel Device blocks access to all URLs except ones listed below.
Add New
Service Click this to show a screen in which you can add a new service rule. You can configure the
Service Name , Protocol , and Port of the new rule, as shown in Figure 136 .
# This shows the index number of the rule.