manualshive.com logo in svg

ZyXEL Communications EX3510-B1, User Manual

Share
Download
ZyXEL Communications EX3510-B1 User Manual Download Page 290

Appendix B IPv6

EX3510-B1 User’s Guide

290

Unspecified Address

An unspecified address (0:0:0:0:0:0:0:0 or ::) is used as the source address when a device does not have 
its own address. It is similar to “0.0.0.0” in IPv4.

Loopback Address

A loopback address (0:0:0:0:0:0:0:1 or ::1) allows a host to send packets to itself. It is similar to “127.0.0.1” 
in IPv4.

Multicast Address

In IPv6, multicast addresses provide the same functionality as IPv4 broadcast addresses. Broadcasting is 
not supported in IPv6. A multicast address allows a host to send packets to all hosts in a multicast group.

Multicast scope allows you to determine the size of the multicast group. A multicast address has a 
predefined prefix of ff00::/8. The following table describes some of the predefined multicast addresses.

The following table describes the multicast addresses which are reserved and can not be assigned to a 
multicast group.

Table 125   Predefined Multicast Address

MULTICAST ADDRESS

DESCRIPTION

FF01:0:0:0:0:0:0:1

All hosts on a local node.

FF01:0:0:0:0:0:0:2

All routers on a local node.

FF02:0:0:0:0:0:0:1

All hosts on a local connected link.

FF02:0:0:0:0:0:0:2

All routers on a local connected link.

FF05:0:0:0:0:0:0:2

All routers on a local site.

FF05:0:0:0:0:0:1:3

All DHCP severs on a local site.

Table 126   Reserved Multicast Address

MULTICAST ADDRESS

FF00:0:0:0:0:0:0:0

FF01:0:0:0:0:0:0:0

FF02:0:0:0:0:0:0:0

FF03:0:0:0:0:0:0:0

FF04:0:0:0:0:0:0:0

FF05:0:0:0:0:0:0:0

FF06:0:0:0:0:0:0:0

FF07:0:0:0:0:0:0:0

FF08:0:0:0:0:0:0:0

FF09:0:0:0:0:0:0:0

FF0A:0:0:0:0:0:0:0

FF0B:0:0:0:0:0:0:0

FF0C:0:0:0:0:0:0:0

FF0D:0:0:0:0:0:0:0

Summary of Contents for EX3510-B1


























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands