manualshive.com logo in svg

ZyXEL Communications EX3510-B1, User Manual

Share
Download
ZyXEL Communications EX3510-B1 User Manual Download Page 21

 Chapter 1 Introducing the Zyxel Device

EX3510-B1 User’s Guide

21

1.5.2  Rear Panel

The connection ports are located on the rear panel.

WAN

Green

On

The Zyxel Device has a successful 10M / 100M / 1Gbps Ethernet connection 
on the WAN.

Off

The Zyxel Device does not have an Ethernet connection with the WAN.

LAN

Green

On

The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection 
with a device on the Local Area Network (LAN) via the ETHERNET1-4 ports.

Blinking

The Zyxel Device is sending or receiving data to/from the LAN at 10/100/
1000 Mbps via the ETHERNET1-4 ports.

Off

The Zyxel Device does not have an Ethernet connection with the LAN via 
the ETHERNET1~4 ports.

USB

The USB LED is reserved for future development.

2.4G WiFi

Green

On

The 2.4G wireless network is activated.

Blinking

The Zyxel Device is communicating with 2.4G wireless clients.

Off

The 2.4G wireless network is not activated.

5G WiFi

Green

On

The 5G wireless network is activated.

Blinking

The Zyxel Device is communicating with 5G wireless clients.

Off

The 5G wireless network is not activated.

WPS

Green

Blinking

The Zyxel Device is setting up a WPS connection with a wireless client.

Off

The Zyxel Device has set up a WPS connection with a wireless client or WPS 
has not been enabled.

Amber

Blinking

The Zyxel Device is pairing with IPTV SSID.

Table 2   LED Descriptions (continued)

LED

COLOR

STATUS

DESCRIPTION

Summary of Contents for EX3510-B1


























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands