manualshive.com logo in svg

ZyXEL Communications EX3510-B1, User Manual

Share
Download
ZyXEL Communications EX3510-B1 User Manual Download Page 193

 Chapter 14 VLAN Group

EX3510-B1 User’s Guide

193

The following table describes the fields in this screen.

Table 74   Add/Edit VLAN Group

LABEL

DESCRIPTION

VLAN Group 
Name

Enter a name to identify this group. You can enter up to 30 characters. You can use letters, 
numbers, hyphens (-) and underscores (_). Spaces are not allowed.

VLAN ID

Enter a unique ID number, from 1 to 4,094, to identify this VLAN group. Outgoing traffic is tagged 
with this ID if 

TX Tagging

 is selected below.

LAN

Select 

Include

 to add the associated LAN interface to this VLAN group.

Note: Select 

TX Tagging

 to tag outgoing traffic from the associated LAN port with the 

VLAN ID

 

number entered above.

Cancel

Click 

Cancel

 to exit this screen without saving any changes.

OK

Click 

OK

 to save your changes.

Summary of Contents for EX3510-B1


























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands