ZyXEL Communications ARMOR G5, User Manual, Page: 78 / 186

NBG7815 User’s Guide
78
C
HA PTER
9
WAN
9.1 O ve rvie w
This chapter discusses the NBG7815’s
WAN
screens. Use these screens to configure your NBG7815 for
Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the Internet. It
connects your private networks such as a LAN (Local Area Network) and other networks, so that a
computer in one location can communicate with computers in other locations.
Fig ure 40
LAN and WAN
Note: Features in this chapter are not available if you are using bridge mode.
9.2 Wha t Yo u C a n Do
• Use the
Inte rne t C o nne c tio n
screen to enter your ISP information and set how the computer acquires
its IP, DNS and WAN MAC addresses ( Section 9.4 on page 80 ).
• Use the
NAT & Po rt Fo rwa rding
screen to enable NAT, set a default server and change your NBG7815’s
port forwarding settings ( Section 9.5 on page 89 ).
• Use the
Pa ssthro ug h
screen to configure your NBG7815’s ALGs and VPN pass-through settings ( Section
9.6 on page 92 )
• Use the
Po rt Trig g e r
screen to configure your NBG7815’s trigger port settings ( Section 9.7 on page 94 ).
• Use the
Dyna m ic DNS
screen to change your NBG7815’s DDNS settings ( Section 9.8 on page 96 ).
• Use the
UPnP
screen to enable UPnP on your NBG7815 ( Section 9.9 on page 97 ).