ZyXEL Communications ARMOR G5, User Manual, Page: 71 / 186

Chapter 8 Applications
NBG7815 User’s Guide
71
Fig ure 33
USB Application > FTP
The following table describes the labels in this screen.
8.4.2.1 Add FTP Ac c o unt Sc re e n
Use this screen to configure settings for a FTP account.
Click
USB Applic a tio n
>
FTP
>
Add Rule
to show the following screen.
Table 19 Expert Mode > Applications > File Sharing > FTP
LABEL DESC RIPTIO N
Enable FTP Select this to enable the FTP server on the NBG7815 for file sharing using FTP.
Port You may change the server port number for FTP if needed, however you must use the same
port number in order to use that service for file sharing.
User Accounts Before you can share files you need a user account. Configure the following fields to set up
a file-sharing account.
No. This is the index number of the user account.
Status This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
User Name This field displays the user name that will be allowed to access the shared files.
USB This field displays the user’s access rights to the USB storage device which is connected to
the NBG7815’s USB port.
Upstream
Bandwidth This field shows the maximum bandwidth (in Kbps) allowed for incoming FTP traffic.
Downstream
Bandwidth This field shows the maximum bandwidth (in Kbps) allowed for outgoing FTP traffic.
Actions Click the icons under
Ac tio ns
to delete or edit a port forwarding rule.
Click to delete an existing trigger port settings.
Click to edit an existing trigger port settings.
Apply Click
Apply
to save your changes back to the NBG7815.
Cancel Click
C a nc e l
to begin configuring this screen afresh.