Chapter 12 Security
NBG7815 User’s Guide
132
Fig ure 75
Settings > Firewall > IPv6 Firewall > Add Rule
The following table describes the labels in this screen.
Table 45 Settings > Firewall > IPv4 Firewall > Add Rule
LABEL
DESC RIPTIO N
Service Name
Enter a name that identifies or describes the firewall rule.
MAC Address
Enter the MAC address of the computer for which the firewall rule applies.
Dest IP Address
Enter the IP address of the computer to which traffic for the application or service is
entering.
The NBG7815 applies the firewall rule to traffic initiating from this computer.
Source IP Address
Enter the IP address of the computer that initializes traffic for the application or
service.
The NBG7815 applies the firewall rule to traffic initiating from this computer.
Dest Port Range
This is the port number/range of the destination that define the traffic type, for
example TCP port 80 defines web traffic.
Source Port Range
This is the port number/range of the source that define the traffic type, for example
TCP port 80 defines web traffic.
Protocol
Select the protocol (
TC P
,
UDP
or
IC MP
) used to transport the packets for which you
want to apply the firewall rule.
Apply
Click
Apply
to save the settings.
Cancel
Click
C a nc e l
to exist this screen without saving.
Summary of Contents for ARMOR G5
