ZyXEL Communications ARMOR G5, User Manual, Page: 130 / 186

Chapter 12 Security
NBG7815 User’s Guide
130
The following table describes the labels in this screen.
12.3 IPv6 Fire wa ll Sc re e n
Use this screen to enable and create IPv6 firewall rules to filter IPv6 traffic. Click
Se tting s
>
Fire wa ll
>
IPv6
Fire wa ll
to show the following screen.
Fig ure 74
Settings > Firewall > IPv6 Firewall
Table 43 Settings > Firewall > IPv4 Firewall > Add Rule
LABEL DESC RIPTIO N
Service Name Enter a name that identifies or describes the firewall rule.
MAC Address Enter the MAC address of the computer for which the firewall rule applies.
Dest IP Address Enter the IP address of the computer to which traffic for the application or service is
entering.
The NBG7815 applies the firewall rule to traffic initiating from this computer.
Source IP Address Enter the IP address of the computer that initializes traffic for the application or
service.
The NBG7815 applies the firewall rule to traffic initiating from this computer.
Dest Port Range This is the port number/range of the destination that define the traffic type, for
example TCP port 80 defines web traffic.
Source Port Range This is the port number/range of the source that define the traffic type, for example
TCP port 80 defines web traffic.
Protocol Select the protocol (
TC P
,
UDP
or
IC MP
) used to transport the packets for which you
want to apply the firewall rule.
Apply Click
Apply
to save the settings.
Cancel Click
C a nc e l
to exist this screen without saving.