ZyXEL Communications ARMOR G5, User Manual, Page: 140 / 186

Chapter 13 System
NBG7815 User’s Guide
140
O nline Firm wa re
Find firmware at www.zyxel.com in a file that uses the version number and project code with a “*.bin”
extension, e.g., “V1.00(ABCS.0)C0.bin”. The upload process uses HTTP (Hypertext Transfer Protocol) and
may take up to two minutes. After a successful upload, the system will reboot.
Syste m Re sta rt
System restart allows you to reboot the NBG7815 without turning the power off.
Re se t to Fa c to ry De fa ult
Click the
RESET TO FAC TO RY DEFAULT
button in this section to clear all user-entered configuration
information and returns the NBG7815 to its factory defaults.
You can also press the
RESET
button on the rear panel to reset the factory defaults of your NBG7815.
Click
Se tting s
>
Syste m
>
Ma inte na nc e
to show the following screen.
Fig ure 82
Settings > System > Maintenance
13.7 O pe ra ting Mo de Sc re e n
Use this screen to select how you want to use your NBG7815.
The
O pe ra ting Mo de
function lets you configure your NBG7815 as a router or bridge. You can choose
between
Sta nda rd Mo de
, and
Bridg e Mo de
depending on your network topology and the features you
require from your device.
The following describes the device modes available in your NBG7815.