ZyXEL Communications ARMOR G5, User Manual, Page: 14 / 186

Chapter 1 Introduction
NBG7815 User’s Guide
14
1
Make sure the power LED is on (not blinking).
2
Open the Web Configurator.
3
Click
Se tting s
>
WiFi
>
WPS
, and the press the WPS button.
4
Press the WPS button on another WPS-enabled device within range of the NBG7815.
Note: You must activate WPS in the NBG7815 and in another wireless device within two
minutes of each other.
For more information on using WPS, see Section 7.2 on page 43 .
1.7 LEDs
Fig ure 4
Front Panel
The following table describes the front panel LED.
Table 1 Front Panel LED
C O LO R STATUS DESC RIPTIO N
White On The NBG7815 is receiving power.
Blinking The NBG7815 is booting.
Dark Blue On Blue tooth is ready.
Blinking Blue tooth configuration is in process.