ZES ZIMMER LMG450, User Manual

Page: 131 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
131
10.2 Commands
Here you find all commands the instrument can handle. The commands are ordered like in the
SCPI tree structure. The description is always the same:
SCPI: The SCPI syntax of the command
SHORT: The SHORT syntax of the command
ID: The ID for script editor and similar Mode: The valid measuring modes
Type: The data type Suffix: The valid suffix range
Value: The value range List: The valid list range
Unit:
The physical unit
Group:
The valid group range
An ‘n/a’ means ‘not applicable’. If you for example see an ‘n/a’ in the ‘Value:’ field, then this
command has no value at all. Or it is a float number with all valid codes according IEEE754.
The titles of the useable commands are in a box. There you find from left to right: SCPI
command, SHORT command and the ID if existing.
Please see also 10.1, ‘Short syntax description’.
For all this commands there is a separated index. See chapter 17, ‘Interface command
index’.
10.2.1 IEEE488.2 common commands
10.2.1.1 *CLS *CLS
SCPI: *CLS/nquery/
SHORT: *CLS/nquery/
ID: n/a Mode: all
Type: n/a Suffix: n/a
Value: n/a List: n/a
Unit: n/a Group: n/a
Clears the event registers of all status data structures in a device and the error/event queue.
10.2.1.2 *ESE *ESE
SCPI: *ESE <NRi>
SHORT: *ESE <NRi>
ID: n/a Mode: n/a
Type: long int Suffix: n/a
Value: 0...255 List: n/a
Unit: n/a Group: n/a
Used to set up or read out the Event Status Enable Register.