ZES ZIMMER LMG450, User Manual

Page: 233 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 11
233
ComA: baudrate
The measuring values are transferred in the chosen ‘Output as’ format via ComA with the
displayed baud rate. With Set you can change baud rate, protocol or the format. For the
connection to the PC you have to use a 1:1 cable.
ComB: baudrate
Same like ‘ComA: baudrate’, but another jack and you have to use a null-modem cable.
ComA: BMP2PC
If you don’t have a storage media but want to get screen shots, you can use this profile. Use
our program BMP2PC (available on our homepage www.zes.com) and connect your PC with
a 1:1 cable with ComA. Then you can transfer a screen shot to the PC and the receiving
program stores it as a bitmap file.
Lpt: printer
On a connected printer you can output measuring values as well as hardcopies of the actual
screen. The 'output as displayed' is pure text, so that you can connect almost every printer. For
a graphical output you have to setup the correct printer type. Due to the growing number of
printers it’s not possible to write a driver for each type. So we implemented 5 generic drivers
which can drive most available printers:
EPSON 9-Pin
EPSON ESP/P
EPSON ESP/P2
HP DeskJet
HP LaserJet
In case of any doubts please contact your local computer shop.
After pressing Set you can setup the model (Prn) and the output format (Output as). Further
on you can create a comment (Rem) which is also printed (see 11.5, ‘Remarks, header lines’).
Some models try to get a complete image of a page in their RAM before they start printing.
Therefore you might think, the printer is not working, if you send it just some few lines.
It’s not a good idea to output a page after just few lines. Therefore we send as default no form
feed to the printer. But you can change this with At end: instead of 'None' setup 'paper out'. Or
you can press Page out to do this manually, when you like.
11.3.1 Output intervals
With Mode you can setup how often the values should be output: