ZES ZIMMER LMG450, User Manual

Page: 134 / 306

Interfaces (IEEE option L45-O1) LMG450
134
10.2.1.10 *SRE *SRE
SCPI: *SRE <NRi>
SHORT: *SRE <NRi>
ID: n/a Mode: all
Type: long int Suffix: n/a
Value: 0...255 List: n/a
Unit: n/a Group: n/a
Sets or queries the Service Request Enable Register
10.2.1.11 *STB? *STB?
SCPI: *STB? /qonly/
SHORT: *STB? /qonly/
ID: n/a Mode: all
Type: long int Suffix: n/a
Value: 0...255 List: n/a
Unit: n/a Group: n/a
Queries the Status Byte Register.
10.2.1.12 *TRG *TRG
SCPI: *TRG/nquery/
SHORT: *TRG/nquery/
ID: n/a Mode: all
Type: n/a Suffix: n/a
Value: n/a List: n/a
Unit: n/a Group: n/a
Triggers the same action that happens when programmer sends DT1 via IEEE488.1 interface
or ‘&TRG<cr><lf>‘ via RS232 interface. Actually nothing is performed.
10.2.1.13 *TST? *TST?
SCPI: *TST? /qonly/ <NRi>
SHORT: *TST?/qonly/ <NRi>
ID: n/a Mode: all
Type: long int Suffix: n/a
Value: n/a List: n/a
Unit: n/a Group: n/a
Initiates a self test. Returns a value depending on <NRi>. This command should only be used
by ZES and not by customers.