ZES ZIMMER LMG450, User Manual

Page: 159 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
159
Type: float Suffix: 1...4(prCE), 1...12(HARM100)
Value: n/a List: 0...40/99 (prCE/HARM100) for order
Unit: A Group: n/a
Reads the amplitude of the harmonics of the current.
10.2.4.1.7.6.4 :FPRotz? HFMX?
SCPI: :FETCh[:SCALar]:HARMonics:CURRent:FPRotz? /qonly/ <list> |
:READ[:SCALar]:HARMonics:CURRent:FPRotz? /qonly/ <list>
SHORT: HFMX? /qonly/ <list>
ID: n/a Mode: prCE
Type: float Suffix: 1...4
Value: in % List: 0...40 for harmonic order
Unit: n/a Group: n/a
Reads the maximum duration in percent of a 2.5 minute window while each harmonic was over
the 100% limit.
10.2.4.1.7.6.5 :FRESult? HIFL?
SCPI: :FETCh[:SCALar]:HARMonics:CURRent:FRESult? /qonly/ <list> |
:READ[:SCALar]:HARMonics:CURRent:FRESult? /qonly/ <list>
SHORT: HIFL? /qonly/ <list>
ID: n/a Mode: prCE
Type: long int Suffix: 1...4
Value: 0...2
41
-1 List: 0, 1 for array element
Unit: n/a Group: n/a
Reads the long time result of the fluctuating harmonics of the current. This is an array of 2 long
numbers, so that you get a 64 bit result, if you read out both elements. Each bit from 0 to 40
indicates, if the corresponding harmonic has at least one time while the measuring violated the
limit for more than 10% of a 2.5 minute window.
10.2.4.1.7.6.6 :GFResult? HIGF?
SCPI: :FETCh[:SCALar]:HARMonics:CURRent:GFResult? /qonly/ |
:READ[:SCALar]:HARMonics:CURRent:GFResult? /qonly/
SHORT: HIGF? /qonly/
ID: n/a Mode: prCE
Type: long int Suffix: 1...4
Value: n/a List: n/a
Unit: n/a Group: n/a
Reads the global final result of the current check.
Bit 0: Set if the total current evaluation failed (=if any of the sub evaluation failed). Cleared
otherwise.
Bit 1: Set if any of the harmonics was > 100% of the allowed limit, cleared otherwise.