ZES ZIMMER LMG450, User Manual

Page: 157 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
157
10.2.4.1.7.4 :APOWer? HPAV?
SCPI: :FETCh[:SCALar]:HARMonics:APOWer? /qonly/ |
:READ[:SCALar]:HARMonics:APOWer? /qonly/
SHORT: HPAV? /qonly/
ID: n/a Mode: prCE
Type: float Suffix: 1...4
Value: n/a List: n/a
Unit: W Group: n/a
Reads the smoothed power of the harmonic measuring.
10.2.4.1.7.5 :CDResult? HENS?
SCPI: :FETCh[:SCALar]:HARMonics:CDResult? /qonly/ |
:READ[:SCALar]:HARMonics:CDResult? /qonly/
SHORT: HENS? /qonly/
ID: n/a Mode: prCE
Type: long int Suffix: 1...4
Value: n/a List: n/a
Unit: n/a Group: n/a
Reads the class D result of the harmonic measuring:
Bit 0: Set if the total class D evaluation failed (=if any of the sub evaluation failed). Cleared
otherwise.
Bit 1: Set if the current was for <95% of time under the positive special envelop, cleared
otherwise.
Bit 2: Set if the current was for <95% of time under the negative special envelop, cleared
otherwise.
Bit 3: Set if P>600W, cleared otherwise.
Bit 4: Set if the total class C evaluation failed (=if any of the sub evaluation failed). Cleared
otherwise.
Bit 5: Set if the 60° condition failed in first halfwave. Cleared otherwise.
Bit 6: Set if the 65° condition failed in first halfwave. Cleared otherwise.
Bit 7: Set if the 90° condition failed in first halfwave. Cleared otherwise.
Bit 8: Set if the peak value in first halfwave is negative. Cleared otherwise.
Bit 9: Set if the 60° condition failed in second halfwave. Cleared otherwise.
Bit 10: Set if the 65° condition failed in second halfwave. Cleared otherwise.
Bit 11: Set if the 90° condition failed in second halfwave. Cleared otherwise.
Bit 12: Set if the peak value in second halfwave is negative. Cleared otherwise.
10.2.4.1.7.6 :CURRent
:CALCulate
:DISPlay
:FETCh
→
[:SCALar]
→
:CURRent
:FORMat :CYCLe
:INITiate :DINPut