ZES ZIMMER LMG450, User Manual

Page: 205 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
205
Value: n/a, [*RST default value] = ‘Utrms’ List: n/a
Unit: n/a Group: n/a
Sets or queries the setting of the value of the digital outputs. As <string> you have to enter the
same string as you would enter when using the instrument without interface. So you have to
sent a valid ID!
10.2.11.2 :VOLTage
10.2.11.2.1 :SCALe
:CALCulate
:DISPlay
:FETCh
:FORMat
:INITiate
:INPut
:INSTrument
:MEMory
:READ
:SENSe
:SOURce
→
:DIGital
:STATus
:VOLTage
→
:SCALe
→
:FSCale
:SYSTem :VALue :ZERO
:TRIGger
10.2.11.2.1.1 :FSCale AOHI
SCPI: :SOURce:VOLTage:SCALe:FSCale <NRf>
SHORT: AOHI <NRf>
ID: n/a Mode: All
Type: float Suffix: 1...8
Value: n/a, [*RST default value] = 10 List: n/a
Unit: n/a Group: n/a
Sets or queries the setting of the full scale of the analogue outputs.
10.2.11.2.1.2 :ZERO AOLO
SCPI: :SOURce:VOLTage:SCALe:ZERO <NRf>
SHORT: AOLO <NRf>
ID: n/a Mode: All
Type: float Suffix: 1...8
Value: n/a, [*RST default value] = 0 List: n/a
Unit: n/a Group: n/a
Sets or queries the setting of the zero position of the analogue outputs.
10.2.11.2.2 :VALue AOIX
SCPI: :SOURce:VOLTage:VALue <string>
SHORT: AOIX <string>