ZES ZIMMER LMG450, User Manual

Page: 201 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
201
10.2.10.14.2 :IUPDate SACT
SCPI: :SENSe:WAVeform:IUPDate/nquery/ [<NRi>]
SHORT: SACT/nquery/ [<NRi>]
ID: n/a Mode: All
Type: n/a Suffix: n/a
Value: n/a List: n/a
Unit: n/a Group: optional [<NRi>], 0=A, 1=B, ...
Requests new information about the scope data. Before this command you should set
‘:MEMory:FREeze ON’. After this command you can use ‘:SENS:WAV:SATR’,
‘:SENS:WAV:SBTR’, ‘:SENS:WAV:SSAM’ and ‘:SENS:WAV:SCTR’.
10.2.10.14.3 :SATRigger? SATR?
SCPI: :SENSe:WAVeform:SATRigger? /qonly/ [<NRi>]
SHORT: SATR? /qonly/ [<NRi>]
ID: n/a Mode: All
Type: long int Suffix: n/a
Value: n/a List: n/a
Unit: n/a Group: optional [<NRi>], 0=A, 1=B, ...
Reads how many sample values are available after the trigger event. See also
‘:SENS:WAV:IUPD’ for further information.
10.2.10.14.4 :SBTRigger? SBTR?
SCPI: :SENSe:WAVeform:SBTRigger? /qonly/ [<NRi>]
SHORT: SBTR? /qonly/ [<NRi>]
ID: n/a Mode: All
Type: long int Suffix: n/a
Value: n/a List: n/a
Unit: n/a Group: optional [<NRi>], 0=A, 1=B, ...
Reads how many sample values are available before the trigger event. See also
‘:SENS:WAV:IUPD’ for further information.
10.2.10.14.5 :SCTRigger? SCTT?
SCPI: :SENSe:WAVeform:SCTRigger? /qonly/
SHORT: SCTT? /qonly/
ID: n/a Mode: All
Type: long int Suffix: n/a
Value: 0...2
31
-1 List: n/a
Unit: n/a Group: n/a
Reads the number of the sample value at the trigger. See also ‘:SENS:WAV:IUPD’ for further
information. The sample values of the instrument are counted. At the end of each cycle this