ZES ZIMMER LMG450, User Manual

Page: 59 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 4
59
4.4.3 Custom menu
In the standard menus Voltage, Current, ... (see chapters below) we have defined some values
to be displayed which should fit to most customers. For some special applications you can
define in the Custom menu your own values and graphics which should be displayed. Further
on you can define your own values by using the integrated script editor (see 4.4.4,
‘Script/Formula editor’).
When entering you get at least two tabs. To change between the tabs, you have to use the
rotary knob. To get the softkeys inside a tab you have to press the rotary knob.
4.4.3.1 New menu tab
Here you first have to define the name of a new (user defined) tab with Name. Then you have
to define the mask for the menu with Form. Depending on this mask you can define up to 50
values for a menu. If everything is finished you can create the new menu by pressing Make
new. The new menu appears as a new tab which can be edit (see 4.4.3.3, ‘User defined tab’).
You can define up to 8 menus.
With Load you can recall a previously saved menu from memory card or floppy if installed.
You have to select a filename from the list.
4.4.3.2 Vars tab
In the Vars tab you see all variables. By default they are named ‘var0’ to ‘var11’. With Reset
you can set them all to ‘0.0’. With Edit you enter the script editor. Here you can define new
variables, formulas as well as small scripts to control your measuring. For a detailed
description see 4.4.4, ‘Script/Formula editor’.
4.4.3.3 User defined tab
Here you do the definitions, which values appear at which place. With the rotary knob you
choose the position an press Edit Item. In the dialog you choose with Typ the kind of data do
display:
empty The item will displayed blank. Choosing this is the same like pressing the Del
Item softkey.
Value When choosing this have to choose with Prop a measuring value which
should be displayed as value with unit, but without identifier. How to enter
the Prop value see 4.5, ‘Entering identifiers, characters and text’.
Name+Value When choosing this have to choose with Prop a measuring value which
should be displayed as value with unit and with leading identifier. How to
enter the Prop value see 4.5, ‘Entering identifiers, characters and text’.