ZES ZIMMER LMG450, User Manual

Page: 199 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
199
:TRIGger :FILTer
:FINPut
:FLICker
:HARMonics
:INTegral
:SWEep
:TRANsient
:VOLTage
→
:RANGe
→
:AUTO
:WAVeform :SCALe :LINTern
:WIRing [:UPPer]
:ZPReject
10.2.10.13.2.1 :AUTO UAM
SCPI: :SENSe:VOLTage:RANGe:AUTO <NRi>
SHORT: UAM <NRi>
ID: n/a Mode: All
Type: long int Suffix: 1...4
Value: 0, 1 List: n/a
Unit: n/a Group: n/a
Reads and sets the status of the autorange function:
‘0’ or ‘MANUAL’ for manual range selection.
‘1’ or ‘AUTO’ for automatic range selection [*RST default value].
10.2.10.13.2.2 :LINTern? UILS?
SCPI: :SENSe:VOLTage:RANGe:LINTern?/qonly/
SHORT: UILS?/qonly/
ID: n/a Mode: All
Type: float Suffix: 1...4
Value: n/a List: n/a
Unit: V Group: n/a
Reads a list with the available ranges. You get several float numbers which are separated by
colons ‘,’. The first number defines the number of following numbers.
10.2.10.13.2.3 [:UPPer] URNG RngU
SCPI: :SENSe:VOLTage:RANGe[:UPPer] <NRf>
SHORT: URNG <NRf>
ID: RngU Mode: All
Type: float Suffix: 1...4
Value: n/a List: n/a
Unit: V Group: n/a
Reads and sets the range for the voltage measurement. The parameter is the nominal value of
the range.