ZES ZIMMER LMG450, User Manual

Page: 203 / 306

Z E S ZIMMER Electronic Systems GmbH Chapter 10
203
The first allowed value in <list> is the value read by :SENSe:WAVeform:SBTRigger?, the last
allowed value that read by :SENSe:WAVeform:SATRigger?
10.2.10.15 :WIRing WIRE
SCPI: :SENSe:WIRing <NRi>
SHORT: WIRE <NRi>
ID: n/a Mode: Normal, HARM100, TRANSIENT
Type: long int Suffix: n/a
Value: 0...7 List: n/a
Unit: n/a Group: n/a
Sets or queries the wiring of the LMG. Following values are allowed (3 to 7 only with option
L45-O6 star to delta conversion!):
0: Wiring ‘4+0’
1: Wiring ‘3+1’ [*RST default value]
2: Wiring ‘2+2’
3: Wiring ‘3+1, U*I*->U
∆
I
∆
‘
4: Wiring ‘3+1, U
∆
I*->U
∆
I
∆
‘
5: Wiring ‘3+1, U
∆
I*->U*I*‘
6: Wiring ‘2+2 U
∆
I*->U
∆
I
∆
‘
7: Wiring ‘2+2, U
∆
I*->U*I*‘
10.2.10.16 :ZPReject ZSUP
SCPI: :SENSe:ZPReject <NRi>
SHORT: ZSUP <NRi>
ID: n/a Mode: Normal
Type: long int Suffix: n/a
Value: 0, 1 List: n/a
Unit: n/a Group: n/a
By this you can deactivate the zero point rejection. It is a long number with following meaning:
0: Zero point rejection is switched off
1: Zero point rejection is switched on [*RST default value]
10.2.11 :SOURce commands
:CALCulate
:DISPlay
:FETCh
:FORMat
:INITiate
:INPut
:INSTrument
:MEMory
:READ
:SENSe
:SOURce
→
:DIGital
:STATus :VOLTage