YOKOGAWA IR800G, User Manual

Page: 50 / 127

IM 11G06A01-02EN
4-3
4. OPERATION
1st Edition : Oct. 27, 2023-00
4.3 Display/operation panel flow chart
The display/operation panel functions as shown in the flow chart below (Figure 4.2).
Measurement mode (*1) Zero calib. Span calib. Auto calib. (*1)
or
or
:Calibration
: Calibration execution
: Menu
Tap to see the menu
select Information
Switch . See 5.5 Information)
● Error log
● Calibration log
● Product information
: return to the previous page
: home, measurement screen.
Maintenance : select an item below
● Blowback (5.6.1 Blowback)
● Loop check (5.6.2 Loop check)
● Valve check(Auto calibration) (5.6.3 Valve
check (Auto calibration))
● Valve check (Auto zero cal.) (5.6.4 Valve
check (Auto zero cal.))
● Valve check (Auto validation) (5.6.5 Valve check (Auto
validation) (*2)
Others : select an item below
● Password 5.3.1 Password)
● Date/Time setting (5.2.2 mA output
settings)
● Adjust panel (5.2.3 Contact output setting
The service mode is for our service personnel
only. Customers cannot use it.
Calibration/Alarm setting : select an item below
● Calibration channel (5.1.1 Calibration channel setting)
● Auto calibration ( 5.1.2 Auto Calibration Setting)
● Auto zero calibration(5.1.3 Auto zero calibration setting
● Validation channel (5.1.4 Validation channel
setting) (*2)
● Auto validation (5.1.5 Setting Automatic
Validation) *2
● Alarm setting (5.1.6 Alarm setting)
● Peak alarm (5.1.7 Peak alarm setting) (*3)
● Blowback (5.1.8 Blowback setting)
Settings : select an item below
● Channel settings (5.2.1 Channel settings)
● mA output settings (5.2.2 mA output settings)
● Contact output settings (5.2.3 Contact output
setting)
● Contact input settings (5.2.4 Contact input
setting)
● Other setting (5.2.5 Other settings)
*1: The display layout differs depending on the component being measured. The display screen scrolls up and down by touching the keys.
*2: Displayed when automatic validation is specified in the basic code.
*3: Displayed only when the option “/A” (Peak alarm) is specified and CO components are present.
Figure 4.2