YOKOGAWA IR800G, User Manual

Page: 79 / 127

IM 11G06A01-02EN
5-24
5. SCREENS
1st Edition : Oct. 27, 2023-00
When you enter the respective screen by pressing "Maintenance," "Others" "Cal/
Alarm Setting" or "Setting" on the Menu screen, you see the maintenance in
progress.
During calibration, validation, and blowback, the following icons are displayed at
the top of the measurement screen.
under calibration :
during validation :
during blowback :
When an error is detected, the is displayed at the top of the screen due to
some abnormality or calibration-related error.
Hold follows the Hold setting for maintenance, calibration, validation, and
blowback, and follows the Hold (in case of failure) setting when an error occurs.
Response time setting
(1) Tap [Response Time]
The response time setting screen appears.
(2) Tap the Ch for which you want to change the setting.
Enter the numerical values when the keyboard dialog appears.
Output limit setting
(1) Tap [Output limit setting].
Output limit setting screen appears.
(2) Tap the item for which you want to change the setting.
Enter the numerical values when the keyboard dialog appears.