YOKOGAWA IR800G User Manual Download Page 2

Page: 2 / 127

PREFACE

IM11G06A01-02EN

1st Edition : Oct. 27, 2023-00

PREFACE

Thank you for purchasing Yokogawa’s Infrared Gas Analyzer, Model: IR800G/IR810G. Read this

instruction manual carefully.
The related documents are as follows.

General Specifications: GS 11G06A01-01EN

User’s Manual:

IM 11G06A01-01EN IR800G, IR810G Infrared Gas Analyzer

Start-up and Safety Precautions

IM 11G06A01-02EN IR800G, IR810G Infrared Gas Analyzer

Installation and Operation (this manual)

TI 11G06A01-01EN

IR800G, IR810G, IR810S Infrared Gas

Analyzer MODBUS Communication

IM 11M12G01-02EN ZR22G and ZR802G Zirconia Oxygen/

Humidity

Analyzer

The “EN” in the document number is the language code, meaning English

An exclusive User’s Manual might be attached to the products whose suffix codes or option

codes contain the code “Z” (made to customers’ specifications). Please read it along with this

manual.
For the latest User’s Manual, download it from our website or scan the QR code.
Search by product model name (IR800G or IR810G).

https://www.yokogawa.com/library/

WARNING

This unit is not explosion-proof type. Do not use it in a place with explosive gases to prevent

explosion, fire or other serious accidents.

CAUTION

• Incomplete installation may result in a fall, electric shock, fire, or injury.
• It is a heavy product. Install with care. Injury or accident may result from tipping over or falling.

• During installation work, care should be taken to keep the unit free from cable chips or

otherforeign objects. Otherwise, it may cause fire, trouble or malfunction of the unit.

No. IM 11G06A01-02EN

1st Edition : Oct. 2023 (YK)

Summary of Contents for IR800G
































































































































Search results

Summary of Contents for IR800G

Reviews:

Related manuals for IR800G

Brands by name

Popular brands

YOKOGAWA IR800G, User Manual

Search results

Summary of Contents for IR800G

Reviews:

Related manuals for IR800G

Brands by name

Popular brands