YOKOGAWA F3LC11-1F, User Manual

Page: 86 / 202

A5-4
IM 34M6H41-02E 2nd Edition : Aug. 1, 2005-00
Software Setting Function BASIC Sample Program
This sample program assumes that the Personal Computer Link module is installed in
slot 2.
10 !*****************************************
20 !*** F3LC12-1F Sample Program
30 !*** Software Setting Function
40 !*****************************************
50 DEFINT A-Z
60 !
70 LCSLOT=2
80 ASSIGN LC12=LCSLOT :! Declare use of module
90 ! ========port #1 8bit/NonParity/stop1/CR, 115.2kbps
100 CONTROL LCSLOT,38;$0021 :! Data format
110 CONTROL LCSLOT,39;$C :! Transmission speed
120 !
130 CONTROL LCSLOT,101;$0004,$0004 :! Turn on Y35 (Setup Request) relay
140 STATUS LCSLOT,101;XREL :! Read input relay
150 WHILE BIT(XREL,2)=0 :! Wait until X3 (Setup Completed) relay
turns on
160 STATUS LCSLOT,101;XREL :! Read input relay
170 END WHILE
180 CONTROL LCSLOT,101;$0000,$0004 :! Turn off Y35 (Setup Request) relay
190 !
200 ! ========port #2 7bit/EvenParity/stop1/SUM, 19200bps
210 CONTROL LCSLOT,88;$0016 :! Data format
220 CONTROL LCSLOT,89;7 :! Transmission speed
230 !
240 CONTROL LCSLOT,102;$0004,$0004 :! Turn on Y51 (Setup Request) relay
250 STATUS LCSLOT,102;XREL :! Read input relay
260 WHILE BIT(XREL,2)=0 :! Wait till X19(Setup Completed) relay is on
270 STATUS LCSLOT,102;XREL :! Read input relay
280 END WHILE
290 CONTROL LCSLOT,102;$0000,$0004 :! Turn off Y51 (Setup Request) relay
300 !
310 END