YOKOGAWA F3LC11-1F, User Manual

Page: 169 / 202

C3-1
IM 34M6H41-01E 3rd Edition : Aug. 1, 2005-00
C3. Setting Up the F3LC11-2N Module
C3.1 Module Setup and Link Procedures
C3.1.1 Module Setup Flow
Figure C3.1 shows the module setup procedures before starting up the FA-M3 system
using a personal computer link module (F3LC11-2N).
Overall system configuration
Start operation
Install personal computer
module on base module
(See Section C3.1.2.)
(See Section C3.1.3.)
Carry out external wiring of
personal computer and
display
Apply power to personal
computer, display, FA-M3,
etc.
(See Section C3.1.4.)
Generate programs for
personal computer/display
(See Chapter C6.)
Set module switches
Preparation of external equipment
[1] Station number (rotary switch)
[2] Transmission speed (rotary switch)
[3] Data set (DIP switch)
• Data length
• Parity check yes/no
• Parity odd/even
• Stop-bit length
• Checksum yes/no
• Ending character yes/no
• Protective feature yes/no
Configuration FA-M3 single system
Wiring of RS-232-C connector and
RS-422-A/RS-485 terminal block
F0301.EPS
Figure C3.1 Module Setup Flowchart (F3LC11-2N)