YOKOGAWA F3LC11-1F, User Manual

Page: 171 / 202

C3-3
IM 34M6H41-01E 3rd Edition : Aug. 1, 2005-00
[2] Transmission Speed Switch
Set the desired transmission speed (1 to10) with the decimal rotary switch. With an
appropriate ordinary screwdriver, change the direction of the arrow. Do not position the
arrow at 7, 8, or 9. The factory default setting of the switch is 5 (9600 bps).
8
9
0
1
2
3
4
5
6
7
Setup
0
1
2
3
4
5
6
Transmission Speed (bps)
300
600
1200
2400
4800
9600
19200
F0303.EPS
Figure C3.3 Transmission Speed Switch of the F3LC11-2N Personal Computer Link Module
[3] Data Format Switch:
Set the data transmission format with the 8-bit DIP switch. Set the DIP switches by sliding
each switch to its on or off position. Up to six functions can be set with this switch. The
factory setting is ON for switch 1 and OFF for switches 2 to 8.
1
2
3
4
5
6
7
8
O
F
F
OFF ON
1 Data length 7 bits 8 bits 8 bits On
2 Parity None Yes None Off
3 Odd No. Even No. Off
4 Stop bit 1 bit 2 bits 1 bit Off
5 Check sum None Yes None Off
6 Designation of termination character None Yes None Off
7* Protection feature None Yes None Off
8 Off
No. Function OFF ON Factory setting
F0304.EPS
Leave switch 8 unchanged from its factory setting (off).
*: If the protection feature is enabled, commands for writing to devices and downloading programs (loading sequence
programs) from this module cannot be executed. (If executed, an error EC = $02 results).
Figure C3.4 Data Format Set Switch of the F3LC11-2N Personal Computer Link Module