YOKOGAWA F3LC11-1F, User Manual

Page: 84 / 202

A5-2
IM 34M6H41-02E 2nd Edition : Aug. 1, 2005-00
Relay and Register Settings
Table A5.1 List of Relays Related to Software Setting Function
Input Relay Name Description
Xlmm03 #1
Xlmm19 #2 Setup Completed
When the Setup Request is turned on, this relay turns on when
setting is completed.
Turning off the Setup Request also turns off this relay.
Ylmm35 #1
Ylmm51 #2
Setup Request
Turn on this relay to request for software setting of the data format or
transmission speed.
Turn it off when Setup Completed turns on.
Ylmmnn: “l” denotes the unit; “mm” denotes the slot.
F3LC12-1F: #1: for port 1/#2: for port 2
F3LC11-1F: use only #1. #2 is reserved.
Table A5.2 List of Registers Related to Software Setting Function
Register
Number
Name Setting Range
Default
Value
38 #1
88 #2
Data Format Setting (equivalent to SW2)
The low byte corresponds to DIP switches 1-8 of SW2
(the high byte is 00)
b7 b6 b5 b4 b3 b2 b1 b0
MSB
LSB
b0: character length 0: 7bits / 1: 8bits
b1: parity 0: no / 1: yes
b2: (if parity is ‘yes’) 0: odd / 1: even
b3: stop bits 0: 1bit / 1: 2bits
b4: checksum 0: no / 1: yes
b5: ending character (CR) 0: no / 1: yes
b6: protection feature 0: no / 1: yes
b7: security feature 0: no / 1: yes
$0000-$00FF $0001
39 #1
89 #2
Transmission speed setting (corresponds to SW1) $0000-$000C
$0000: 300 (bps)
$0001: 600
$0002: 1200
$0003: 2400
$0004: 4800
$0005: 9600
$0006: 14400
$0007: 19200
$0008: 28800
$0009: 38400
$000A: 57.6k
$000B: 76.8k
$000C: 115.2k
$000C
There is no software setting corresponding to SW3.
Use the data position numbers given in the table when accessing the module from a ladder program. When accessing from
a BASIC program, use the data position numbers given in Tables A1.4 and A1.5 instead.